Deciding where to mount the brackets:
Ensure that brackets are positioned a suitable distance away from any window/ door handles or any other obstructions to allow the blind to operate smoothly.
A bracket should sit either side of the rail, 110mm away from the end. Remaining brackets should be equally distributed along the width.
Hold each bracket into place and mark the hole positions using a pencil. Fit each bracket using 2 screws provided.
If a pilot hole is required, use a 2.5mm drill bit. Ensure the brackets are level to ensure the smooth operation of the blind.
For fixing to alternative surfaces i.e. plaster/ stroke concrete, alternative suitable fixings should be used.